电 话：xxxx-00000000
传 真：xxxx-000000
邮 箱：xxxxx.cn
地 址：xxxxxxxxxx
 DE980 |  Interior Wall - CanMax Series |  6.5kg/package |
Master Clean Wall Paint is a kind of functional indoor coating which is produce with high-quality imported raw materials. Its smooth film, fine texture, strong adhesion, unique super anti-fouling and scrub performance has excellent protection performance for housing, as various stains in the home environment can be easily cleaned up.
strong stain-resistantce;
strong scrubing-resistance;
long-term anti-mildew and antibacterial;
fine and smooth texture;
soft film gloss for delicate wall decoration.
New wall: Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean, dry and smooth.
Revonating wall: remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish, clean and dry thoroughly.
Surface status: Ensure that the surface humidity of the pre-coated substrate is less than10% and the PH value is less than 10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.
DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base.
surfaces of interior walls
brush / roll / spray
According to the base condition, 0-20% water (weight ratio) can be added to dilute;
Excessive dilution damages the effect
touch dry0.5-1 hours
actual dry8 hours
(25℃，relative humidity 70%)
Recoating interval time should be ≥6 hours, the thickness of the paint film should be uniform, no leakage and insufficiency
10-12 m/kg/layer
the coating consumption would be different according to the actual site condition.
Store in a cool, dry place to avoid heat and frost
A shelf life of 30 months if the product is unopened and properly stored.
It is recommended to be transported and stored under the temperature above-5 degrees to avoid freezing deterioration;
Please do not operate in wet or cold weather (temperature below 5℃， relative humidity exceeds 85%), otherwise the expected painting effect can not be achieved.
The quality of the company's products abide by all the requirements of the national quality certification system.
The product should be used under the instruction of the Company, in the event of adverse results because of product mismatching, improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.
Before purchasing, users need to determine whether this product is suitable for your requirements to avoid waste.
Any quality dispute shall be subject to arbitration by the national quality supervision and testing department.
1.Should be kept out of reach of children;
2.Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediately;
3.Disposal of waste shall comply with the requirements of relevant environmental regulations
Mobile: 0757-22891777
Address: Xingtan Town Industrial Park, Shunde District,
Foshan City, Guangdong Province
Online Message
