![]() | ![]() | ![]() |
The Fireshield Paint is formulated with exclusive research and development formula. It is a kind of paint that can be used in high temperature environment. Its heat resistance, no burning in case of open fire, heat insulation and other functions can effectively prevent and slow down the spread of fire when fire occurs. Protect the wall and surrounding objects from being damaged by the flame,and escort your safe home life.
High temperature resistance: can maintain stable performance in high temperature environment to prevent surface damage due to high temperature;
Heat insulation: can effectively prevent the transfer of heat, reduce the surface temperature;
Non-combustible in case of fire: it can effectively prevent and slow down the spread of the fire when the fire occurs, and protect the object from being damaged by the flame;
Odourless and environmentally friendly: pure water-based and odourless formula, environmental protection and safety;
Convenient construction: can be directly painted or sprayed, without professional construction skills,easy to operate.
New wall: Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean, dry and smooth.
Revonating wall: remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish, clean and dry thoroughly.
Surface status: Ensure that the surface humidity of the pre-coated substrate is less than 10% and the PH value is less than 10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.
DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base.
surfaces of interior walls
brush / roll / spray
According to the base condition, 0-20% water (weight ratio) can be added to dilute;
Excessive dilution damages the effect of the coating
touch dry0.5-1 hours
actual dry8 hours
(25℃,relative humidity 70%)
Recoating interval time should be≥6 hours, the thickness of the paint film should be uniform, no leakage and insufficiency
10-12 m/kg/layer
the coating consumption would be different according to the actual site condition.
Store in a cool, dry place to avoid heat and frost
A shelf life of 30 months if the product is unopened and properly stored.
It is recommended to be transported and stored under the temperature above -5 degrees to avoid freezing deterioration;
Please do not operate in wet or cold weather (temperature below 5℃, relative humidity exceeds 85%), otherwise the expected painting effect can not be achieved.
The quality of the company's products abide by all the requirements of the national quality certification system.
The product should be used under the instruction of the Company, in the event of adverse results because of product mismatching, improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.
Before purchasing, users need to determine whether this product is suitable for your requirements to avoid waste.
Any quality dispute shall be subject to arbitration by the national quality supervision and testing department.
1.Should be kept out of reach of children;
2.Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediately;
3.Disposal of waste shall comply with the requirements of relevant environmental regulations.
Mobile: 0757-22891777
Address: Xingtan Town Industrial Park, Shunde District,
Foshan City, Guangdong Province