Products

Products

Current: Home > Product > Interior wall

DE91 Foggy Renovation Paint

  DE91  Interior Wall - CanMax Series  5kg/package

Foggy Renovation Paint adopts eco-formula and unique production process, which can create a unique foggy effect in the application, so that the coating surface presents a hazy and soft texture, giving a kind of elegant and mysterious feeling. Its excellent scrubbing-resistant and anti-fouling function as well as high adhesion make the renovation and upgrading of home decoration more efficient. It is suitable for changing the color of various indoor walls, ceilings, furniture and other surfaces, and can achieve the foggy decoration effect of the whole house.

whole-house application

odourless

abrasion resistant

stain-resistant

high adhesive

easy-to-use

colorful

Operation Instruction
  • Substrate treatment

    New wall: Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean, dry and smooth.

    Revonating wall: remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish, clean and dry thoroughly.

    Surface status: Ensure that the surface humidity of the pre-coated substrate is less than 10% and the PH value is less than10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.

    DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base.

    If you need to work directly on the wooden furniture, clean the floating dust and sand the surface before direct construction.

  • Application Area

    surfaces of interior walls

  • Application methods

    brush / roll / spray

  • Dilution ratio

    According to the base condition,0-20% water (weight ratio) can be added to dilute;

    Excessive dilution damages the effect of the coating

  • Drying time

    touch dry 0.5-1 hours

    actual dry8 hours

    (25℃,relative humidity 70%)

  • Recoat interval

    Recoating interval time should be ≥6 hours, the thickness of the paint film should be uniform, no leakage and insufficiency

  • Theoretical coating consumption

    10-12 m/kg/layer

    the coating consumption would be different according to the actual site condition.

  • Storage

    Store in a cool, dry place to avoid heat and frost

    A shelf life of 30 months if the product is unopened and properly stored.

  • Notice

    It is recommended to be transported and stored under the temperature above-5 degrees to avoid freezing deterioration;

    Please do not operate in wet or cold weather (temperature below 5℃, relative humidity exceeds 85%), otherwise the expected painting effect can not be achieved.

  • Special announcement

    The quality of the company's products abide by all the requirements of the national quality certification system.

    The product should be used under the instruction of the Company, in the event of adverse results because of product mismatching, improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.

    Before purchasing, users need to determine whether this product is suitable for your requirements to avoid waste.

    Any quality dispute shall be subject to arbitration by the national quality supervision and testing department.

  • Safety health environmental protection

    1.Should be kept out of reach of children;

    2.Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediately;

    3.Disposal of waste shall comply with the requirements of relevant environmental regulations.

  • Menu
Copyright @ 2024 Digital Color Coating CO.Ltd. All rights reserved
Technical Support: 祥云平台 Disclaimers