![]() | ![]() | ![]() |
YGF-001A (coarse size)
YGF-001B (fine size )
Powder Effect Paint is a new type of art wall decoration material, which is using polymer material as the main additive, mixing with natural mineral materials and processing with high-tech technique. The product is environmentally friendly, and it has excellent air permeability and durability. The aesthetics of Powder Effect Paint is excellent for the expression of architectural modernism, and it can be widely used in the interior and exterior walls of various buildings.
Non-toxic and tasteless. green environmental protection
Excellentair permeability and anti-contraction
Durable new resistance, and the wall base has a strong bonding force
The colar is simple and the artistic expressicn is strong
New wall:Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean. dry and smooth.
Revonating wall:remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish. clean and dry thoroughly.
Surface status:Ensure that the surface humidity of the pre-coated substrate is less than 10% and the PH value is less than 10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.
DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base
surfaces of interior and exterior walls
Scraping
Powder water - 1: 0.2-0.3 (according to the actual construction situation), stir with a blender for 5 minutes, stir evenly before use
Touch dry 0.5-1hours
Actual dry 8 hours
(25℃,relative humidity 70%)
Recoating interval time should be 3≥8 hours, the thickness of the paint film should be uniform, no leakage and insufficiency
YGF-001A | 2.5-3kg/㎡ |
YGF-001B | 1.5-2kg/㎡ |
The coating consumption would be different according to the actual site condition and the application methods
Store in a cool. dry place to avoid heat and frost
A shelf life of 12months if the product is unapened and properly stored
Please clean all tools with clean water in time when the painting is suspended or finished.
It is recommended to be transported and stored under the temperature above -5 degrees to avaid freezing deterioration
Please do not operate in wet or cold weather (temperature below 5℃, relative humidity exceeds 85%), otherwise the expected painting effect can not be achieved
The quality of the company's products abide by all the requirements of the national quality certification system.
The product should be used under the instruction of the Company, in the event of adverse results because of product mismatching. improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.
Before purchasing. users need to determine whether this product is suitable for your requirements to avoid waste.
Any quality dispute shall be subject to arbitration by the national quality supervision and testing department.
1. Should be kept out of reach of children
2. Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediately
3. Disposal of waste shall comply with the requirements of relevant environmental regulations
Mobile: 0757-22891777
Address: Xingtan Town Industrial Park, Shunde District,
Foshan City, Guangdong Province