电 话：xxxx-00000000
传 真：xxxx-000000
邮 箱：xxxxx.cn
地 址：xxxxxxxxxx
 YWW-000 |  Art wall paint |  20kg/package |
YWW-000（III）（double-pack / coarse size)
YWWX-000（III）(double-pack / fine size)
YWW-100 (single-pack / fine size)
YSJ-01 ~YSJ-15 15 integrated color pastes
Digital Microcement is a new type of decorative material combining a modern industrial production technology with innovative technique. Minimalist style is the main expression of this product, which can unify space coordination and enrich the sense of interior layering at the same time.
1. Strong adhesion
2. The use of high polymer, very durable
3. The overall seamless, unlimited extension of visual impact
4. Neutral formula, environmentally friendly and odorless
New wall：Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean, dry and smooth.
Revonating wall：remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish, clean and dry theroughly.
Surface status：Ensure that the surface humidity of the pre-coated substrate is less than 10% and the PH value is less than 10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.
DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base
surfaces of interior walls
YWW-000(III)(double-pack / course size)
YWWX-000(I1I)(double-pack / fine size)
1. Mix the powder of component A and liquid material of component B in the packing bucket thoroughly and evenly. After mixing, the finished product is paste, no dillution required:
2. Make sure that the primer is dry, scrape Digital Microcement the first layer, and apply the second time after the first is dry.
3.After the second scraping. polish till the 70% or 80% dry (note: the ground construction needs to be polished after completely dry)
4. Finish paint (Note: It is recommended to use high wear-resistant floor varish series for ground construction to strengthen the surface and enhance the texture)
YWW-100(single-pack / fine size) No dillution required, open and use, scraping
Powder: water = 1: 0.2-0.3 (according to the actual construction situation), stir with a blender for 5 minutes, stir evenly before use
Touch dry 0.5-1 hours
Actual dry 8 hours
(25℃，relative humidity 70%)
Recoating interval time should be ≥8 hours, the thickness of the paint film should be uniform, no leakage and insufficiency
2-4 ml/kg /layer
The coating consumption would be different according to the actual site condition and the application methods
Store in a cool, dry place to avoid heat and frost
A shelf life of 12 months if the product is unapened and properly stored.
Please clean all tools with clean water in time when the painting is suspended or finished.
The two-component product must be used up within 4 hours after mixing;
It is recommended to be transported and stored under the temperature above -5 degrees to avoid freezing deterioration:
Please do not operate in wet or cold weather (temperature below 5℃, relative humidity exceeds 85%), otherwise the expected painting effect can not be achieved
The quality of the company's products abide by all the requirements of the national quality certification system.
The product should be used under the instruction of the Company, in the event of adverse results because of product mismatching. improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.
Before purchasing, users need to determine whether this product is suitable for your requirements to avoid waste.
Any quality dispute shall be subject to arbitration by the national quality supervision and testing department
1. Should be kept out of reach of children
2. Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediatelys
3. Disposal of waste shall comply with the requirements of relevant environmental regulations
Mobile: 0757-22891777
Address: Xingtan Town Industrial Park, Shunde District,
Foshan City, Guangdong Province
Online Message
