Products

Products

Current: Home > Product > Art wall paint

YHR001 - YHR012 Soft Stone

  YHR001  Art wall paint  6kg/package

It is produced by polymer emulsion polymer technology and has a decorative effect similar to marble and granite. This product breaks through the difficulty that the color particles are easy to produce scratches when the batch scraping, so you can batch coating and keep the complete color particles

rich color, ariginal stone effect

anti-fouling and easy to clean

Waterproof and mildew resistant

Operation Instruction
  • Substrate treatment

    New wall:Remove dust greasy and loose marl on the surface. If holes are found, repair them promptly to ensure that the wall surface is clean, dry and smooth.

    Revonating wall:remove the weak paint film of the old wall, remove the dust powder and impurities on the surface, smooth and polish, clean and dry thoroughly.

    Surface status:Ensure that the surface humidity of the pre-coated substrate is less than 10% and the PH value is less than 10. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.

    DE33-2 or DE33-3 Putty-Mate is recommended to use in advance to increase the firmness of the base.

  • Application Area

    surfaces of interior walls

  • Application methods

    Batching / scraping

  • Dilution ratio

    No dilution required, direct batch coating: If spraying is needed, dilute with about 30% water

  • Drying time

    Touch dry 2 hours

    Actual dry 8 hours

    (25℃,relative humidity 70%)

  • Recoat interval

    Recoating interval time should be ≥4 hours, the thickness of the paint film should be uniform, no leakage and insufficiency

  • Theoretical coating consumption

    1m//kg/layer

    The coating consumption would be different according to the actual site condition and the application methods

  • Storage

    Store in a cool, dry place to avoid heat and frost

    A shelf life of 6 months if the product is unopened and properly stored.

  • Notice

    Please clean all tools with clean water in time when the painting is suspended or finished.

    It is recommended to be transported and stored under the temperature above -5 degrees to avoid freezing deterioration

    Please do not operate in wet or cold weather (temperature below 5℃, relative humidity excreds 85%), otherwise the expected painting effect can not be achieved

  • Special announcement

    The quality of the company's products abide by all the requirements of the national quality certification system.

    The product should be used under the instruction of the Company, in the event of adverse resultsbecause of product mismatching, improper use or abnormal environmental factors, the Company has the responsibility to provide solutions, but does not assume direct and joint liability.

    Before purchasing, users need to determine whether this product is suitable for your requirements to avoid waste.

    Any quality dispute shall be subject to arbitration by the national quality supervision and testing department.

  • Safety health environmental protection

    1. Should be kept out of reach of children

    2. Necessary protection measures should be taken during construction to avoid inhaling dust and splashing into eyes. In case of intaking, wash with clean water immediately

    3. Disposal of waste shall comply with the requirements of relevant environmental regulations

  • Menu
Copyright @ 2024 Digital Color Coating CO.Ltd. All rights reserved
Technical Support: 祥云平台 Disclaimers